Altea 90 Clei wall bed

Clei ALTEA 90 - design r&s clei

Tilting bed with vertical opening system , available in two sizes, with a new and patented slatted bed base (CF 09).

Dimensions:

• Closed 101 x 35 x 220 cm /39.8 x 13.8 x 86.6 inches
• Open 101 x 213,9 x 220 cm / 39.8 x 84.21 x 86.6 inches
• Height of bed base from floor 33,6 mm / 13.2 inches
• Mattress 85 x 197 x 18 cm / 33.5 x 77.6 x 7.1 inches

TECHNICAL INFORMATION
Altea is a transformable system with a single/intermediate vertical bed with tilting opening system, available either in width mm 1010 and either in depth mm 350 and provided with an innovative patented slatted bed base (CF09). Altea must be fixed to the wall.

Structure in wood with adjustable feet in nylon.
Mattress: spring , latex, 50% memory. Mattress locking belts in nylon with fastener in black nylon.
Available finishes: Structure: Melamine white dover, melamine Whited /Graphite Oak , lacquer CLEI Colour system.
Front: Melamine white dover, melamine Whited /Graphite Oak , lacquer CLEI Colour system , Glossy white Dialux , lacquer + pattern printing. Back
panels always and only in Melamine White.

REMARK - INSTALLATION AND SAFETY
All the configurations of Altea are supplied disassembled and their easy installation is supported by comprehensive instructions.
It is compulsory to fix them to the wall (with exception of version “Altea Relax”) , in 4 fixing points, using the proper hardware supplied by CLEI (squares, rawlplugs with diameter 9mm/0.4 inches and the couple nut-bolt) and following the assembling instructions provided together with the goods.
A plasterboard is not a suitable wall and the fixation can not be considered safe.
The installator is in charge to test the correct fixing and to provide a workmanlike installation. The opening system is fixed to the structure with gears that remain perfectly tighten in both the day and the night positions. Maximum weight supported by the bed Kgs 150.

BED BASE CF 09
The innovation concerns a bed base with a self-locking mechanism both in the vertical and horizontal position, that avoids accidental opening/closing,
and with a front panel to be fixed with no hardware. Features and advantages compared to the standard bed base:
- The safety is assured by the innovative locking system of the bed base through a pin that self-engages (fig. 1)
- Opening and closing of the bed base by an easy movement through the device inserted in the foot (fig. 2)
- The frame and the look of the front come from innovative engineering : soft lines , great thickness , no handles not to compromise the clear look of
the panel+bed base, opening mechanism hidden in the lateral gaps (fig. 3-4)

finishing samples

Matt laminate Matt lacquered Fabric Cat.1